Hummel Croton Inc.
10 Harmich Road
South Plainfield, NJ 07080

Tel: 908-754-1800
Fax: 908-754-1815

Data Sheet
Aluminum Powders (Fliters)

TYPICAL CHEMICAL ANAYSIS
Product Code 01-0812 01-0813
Description Coarse Fliters Fine Fliters
% Non Volatile Matter 99.60% 99.60%
Metallic Impurities 1.00% 1.00%
Extractable Fatty Matter 1.12% 1.12%
Specific Gravity 2.6 2.60%
Granulation
+16 Mesh 10-50% 0-5%
+325 Mesh 90% Max 90% Max

OTHER SPECIFICATIONS: MIL-A-512


PACKAGING: Steel Drum 100, 250, 300 lb.


USES:Pyrotechnics, explosives, flash powder, aluminum paints, plastic filler, in testing for gold, arsenic & mercury; reducer for determining nitrates & nitrite.


HANDLING: Aluminum powder may be ignited by static discharge and burn at extremely high temperature. Once suspended in a dust-laden air cloud, it is readily ignited and very explosive. Do not use water to clean up spills. Use non-sparking tools for cleanup. Reacts violently with halogenated hydrocarbons and with oxidizers. Reseal containers immediately after use. Store away from food and beverages. Use dust respirator when handling. OSHA PEL and ACGIH TLV-TWA have been established for Aluminum at 15-mg/m3 dust and 10 mg/m3 dust respectively. This product may be subject to SARA Section 313 reporting requirements (Al 100%). See SDS for more information.


PROPER SHIPPING NAME: Aluminum


SHIPPING INFORMATION: UN# 1309, Class 4.1, PGII, Label Code 4.1


PRODUCT INFORMATION
Aluminum Powders (Fliters)

CAS Number 7429-90-5
RTEC Number BD-0330000
Melting Point 660 ° C (1220 ° F)
Specific Gravity 2.6
EINEC Number 2310723
Molecular Wt. 26.98
Molecular Formula Al
Water Solubility Insoluble

No warranty, expressed or implied, or merchantability, fitness for a particular purpose or otherwise is made, except that the products herein discussed comply with the chemical description on the labels. Buyer assumes risks of the use, storage and handling. Hummel shall not be liable for any incidental or consequential damages arising directly or indirectly in connection with the purchase, use, storage or handling of this product. The information contained herein is, to the best of our knowledge, true and accurate. However, all recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. We disclaim any liability incurred in connection with the use of these data or suggestions. This information is not to be taken as a license to operate under, or a recommendation to infringe any patent(s). The observance of all regulations and patents is the responsibility of the user. No agent, representative or employee of this company is authorized to vary any terms of this notice.